Status word Stat1.Bit13 (ActualPositionOK) is not reset…
URL: /en-es/go/akb/200905107/1Status word Stat1.Bit13 (ActualPositionOK) is not reset when homing is started (corrected from V2.0) Corrected from: ECS Motion V2.0…
Search
Status word Stat1.Bit13 (ActualPositionOK) is not reset when homing is started (corrected from V2.0) Corrected from: ECS Motion V2.0…
Status word Stat1.Bit13 (ActualPositionOK) always reset…
URL: /en-es/go/akb/200905123/1Status word Stat1.Bit13 (ActualPositionOK) always reset in the case of motor without thermal sensor (corrected from V2.0) Corrected…
If an absolute value encoder is used, or in the case of…
URL: /en-es/go/akb/200905128/1If an absolute value encoder is used, or in the case of C3002=1 the ¨Following error¨ fault message occurs during mains connection…
Homing cannot be started at C4000 = 1 (corrected from…
URL: /en-es/go/akb/200905105/1Homing cannot be started at C4000 = 1 (corrected from V2.0) Corrected from: ECS Motion V2.0 Behaviour of the new version? Homing…
CAN node guarding monitoring: Premature tripping…
URL: /en-es/go/akb/200908120/1CAN node guarding monitoring: Premature tripping possible once after activation (eliminated from V5.0) Eliminated from: ECS power…
Trip reset with C0043=0 via keypad is not possible…
URL: /en-es/go/akb/200908111/1Trip reset with C0043=0 via keypad is not possible (eliminated from V5.0) Eliminated from: ECS power supply module ECSxE, operating…
Incorrect position restoration after power system on…
URL: /en-es/go/akb/200910964/1Incorrect position restoration after power system on with the L_EsEncoderConv function block (elimination) Eliminated…
Number of increments not equal to 2^n in the…
URL: /en-es/go/akb/200910963/1Number of increments not equal to 2^n in the L_EsEncoderConv function block (elimination) Eliminated from: Library…
Incorrect evaluation of a range being exceeded in the…
URL: /en-es/go/akb/200910962/1Incorrect evaluation of a range being exceeded in the L_EsEncoderConv function block (elimination) Eliminated from: Library…
The L_CamSyncIn function block does not synchronise…
URL: /en-es/go/akb/200910961/1The L_CamSyncIn function block does not synchronise with the master speed (elimination) Eliminated from: LenzeCam library…
Incorrect status signals at the L_EsClutchPos function…
URL: /en-es/go/akb/200910894/1Incorrect status signals at the L_EsClutchPos function block (elimination) Eliminated from: Library LenzeElectricalShaft V01.03.04.00…
Incorrect status signals at the L_CamClutchPos function…
URL: /en-es/go/akb/200910888/1Incorrect status signals at the L_CamClutchPos function block (elimination) Eliminated from: Library LenzeCam V01.03.06.00 and higher,…
CANopen - Sending sequence of Emergency and BootUp…
URL: /en-es/go/akb/200908965/1CANopen - Sending sequence of Emergency and BootUp telegrams when device is switched on (remedied from V4.0 onwards) Remedied…
Table positioning - No harmonic setpoint adopted when…
URL: /en-es/go/akb/200908963/1Table positioning - No harmonic setpoint adopted when the operating mode is changed (remedied from V4.0 onwards) Remedied from: 8400…
Table positioning - Torque surge during reference run …
URL: /en-es/go/akb/200908960/1Table positioning - Torque surge during reference run (remedied from V4.0 onwards) Remedied from: 8400 HighLine SW V4.00…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial