Adaptation of the rotor resistance depending on the KTY…
URL: /en-es/go/akb/201300824/1Adaptation of the rotor resistance depending on the KTY temperature (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400…
Search
Adaptation of the rotor resistance depending on the KTY temperature (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400…
Function of the inversion of motor phase rotating…
URL: /en-es/go/akb/201300800/1Function of the inversion of motor phase rotating direction only for V/f (Eliminated from FW 12.00) Eliminated from: Inverter Drives…
Jerk during the deactivation of DC-injection braking at…
URL: /en-es/go/akb/201300799/1Jerk during the deactivation of DC-injection braking at n_act ≠0 (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400…
Imax status signal is not always correct (eliminated in…
URL: /en-es/go/akb/201205317/1Imax status signal is not always correct (eliminated in 8400 StateLine and HighLine from V11.0, TopLine from V02.0) Eliminated as…
Manual inputs for actuating drive speed without…
URL: /en-es/go/akb/201205314/1Manual inputs for actuating drive speed without function (eliminated in 8400 HighLine and StateLine from V11.0, TopLine from…
MCK status displays are not consistent to one another…
URL: /en-es/go/akb/201205319/1MCK status displays are not consistent to one another (eliminated in 8400 HighLine from V11.0, TopLine from V02.0) Eliminated as…
Incorrect response of the earth-fault monitoring…
URL: /en-es/go/akb/201205293/1Incorrect response of the earth-fault monitoring (corrected in 8400 HighLine from V11.0, TopLine from V01.12) Eliminated as…
Digital outputs connected to the backplane bus cannot…
URL: /en-es/go/akb/201301791/1Digital outputs connected to the backplane bus cannot be switched (eliminated from 3200 C V3.6) Eliminated from:3200 C controller…
Function block is not inserted with all inputs and…
URL: /en-es/go/akb/201301763/1Function block is not inserted with all inputs and outputs (eliminated from PLC Designer V3.6) Eliminated from:PLC Designer…
Incorrect measured values displayed on the ¨Parameters¨…
URL: /en-es/go/akb/201301766/1Incorrect measured values displayed on the ¨Parameters¨ tab in the PLC Designer (eliminated as of V3.3) Eliminated as of: PLC…
Parameters of the I/O 1000 modules are reset (corrected…
URL: /en-es/go/akb/201301772/1Parameters of the I/O 1000 modules are reset (corrected from V3.12) Corrected from: PLC Designer V3.12 Response of the new…
Incorrect pole position with PPI 360 ° and…
URL: /en-es/go/akb/201301574/1Incorrect pole position with PPI 360 ° and simultaneously active MOL Corrected from:9400 HighLine firmware version 12.00.18.00 9400…
Application of n_act ≠0 in SC-ASM control mode is not…
URL: /en-es/go/akb/201300798/1Application of n_act ≠0 in SC-ASM control mode is not compensated (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400…
Untrue running of power loss-optimised modulation modes…
URL: /en-es/go/akb/201300820/1Untrue running of power loss-optimised modulation modes (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400 StateLine,…
Brake chopper threshold, LU-threshold, and DC-voltage…
URL: /en-es/go/akb/201300797/1Brake chopper threshold, LU-threshold, and DC-voltage incorrect in the case of 230 V devices (Eliminated from FW 12.00) Eliminated…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial