Servo control operating mode - Default setting…
URL: /en-es/go/akb/200902743/1Servo control operating mode - Default setting deactivates the field weakening controller (remedied from V2.0 onwards) Remedied…
Search
Servo control operating mode - Default setting deactivates the field weakening controller (remedied from V2.0 onwards) Remedied…
Generation of the torque feedforward control from…
URL: /en-es/go/akb/200901745/1Generation of the torque feedforward control from double differentiated position signal (C00276 = 2) (remedied from V4.0) Which products…
When defining motor parameters (C00002 = 72) and the…
URL: /en-es/go/akb/200901759/1When defining motor parameters (C00002 = 72) and the inverter characteristic (C00002 = 71), possible cam data become invalid (remedied…
Stop: Moderate overshoot if greater S-ramp times are…
URL: /en-es/go/akb/200901758/1Stop: Moderate overshoot if greater S-ramp times are used (remedied from V8.0) Eliminated from: 9400 HighLine SW…
The reference speed of the motor is not converted to…
URL: /en-es/go/akb/200901757/1The reference speed of the motor is not converted to the load encoder if the motor has a separate load encoder including gearbox (remedied…
An abort of the identification of pole position does…
URL: /en-es/go/akb/200901755/1An abort of the identification of pole position does not trigger the error response parameterised in C00640 (remedied from…
Increments unequal to the power of two cause position…
URL: /en-es/go/akb/200901753/1Increments unequal to the power of two cause position inaccuracies with the digital frequency module (remedied from V7.0) Eliminated…
Faulty display of the brake resistor utilisation …
URL: /en-es/go/akb/200902790/1Faulty display of the brake resistor utilisation (remedied from SL:V2.01 / HL:V3.01 onwards) Remedied from: 8400 StateLine SW ≤…
Table positioning - Actual position is not updated in…
URL: /en-es/go/akb/200902788/1Table positioning - Actual position is not updated in case of mains off (remedied from V2.01 onwards) Remedied from: 8400 HighLine…
ID1 error during motor identification (remedied from…
URL: /en-es/go/akb/200902787/1ID1 error during motor identification (remedied from SL:V2.01 / HL:V3.01 onwards) Remedied from: 8400 StateLine SW ≤ V3.01…
Max current error cannot be reset in operating mode V/f…
URL: /en-es/go/akb/200807832/1Max current error cannot be reset in operating mode V/f with encoder (remedied from V3.0 onwards) Remedied from: 8400 StateLine…
Trip reset at UG < 100VDC leads to LU entry into the…
URL: /en-es/go/akb/200808509/1Trip reset at UG < 100VDC leads to LU entry into the history buffer (eliminated as of V8.0) Which products are affected? 9300EP position…
Motor PTC monitoring trips when the power supply is…
URL: /en-es/go/akb/200809237/1Motor PTC monitoring trips when the power supply is connected (remedied from V5.0) Eliminated from: 9400 HighLine SW…
Error message when disconnecting the power supply…
URL: /en-es/go/akb/200809229/1Error message when disconnecting the power supply (remedied from V7.0) Eliminated from: 9400 HighLine Single Drive SW V7.0, sizes 8…
Low deceleration values and high shift factor in system…
URL: /en-es/go/akb/200809221/1Low deceleration values and high shift factor in system block LS_Positioning (remedied from V4.0) Eliminated from: 9400 HighLine SW…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial