URL:
/en-de/go/akb/200605966/1
Exceptional response ¨Warning¨ does not activate a warning
Which products are affected?
EVS93xx-EI (Servo PLC V6.x)
EVS93xx-ET (Servo…
URL:
/en-de/go/akb/200605808/1
The following error is not accepted when the home position is set
Which products are affected?
Template Positioner versions 3.1, 3.3 and…
URL:
/en-de/go/akb/200605810/1
Acceleration step when the profile is changed over and in case of S-ramps
Which products are affected?
LenzeMotionControlV0304.lib (part…
URL:
/en-de/go/akb/200601138/1
Compilation error when the Lenze8200Drive.lib library is used
Which products are affected?
ESP-DDS2-x (Drive PLC Developer Studio V2.3)…
URL:
/en-de/go/akb/200605246/1
Faulty parameter setting of the devices ex works (3/2005...7/2006 only)
Which products are affected?
ECS axis modules as A, S, P and M…
URL:
/en-de/go/akb/200604197/1
Improvement of the OU monitoring
Which products are affected?
Servo-Kurvenscheibe 9300 V7.1
Description
The OU message is activated…
URL:
/en-de/go/akb/200603538/1
Wrong solder bead deposits underneath the socket terminal strip X10 of the Application I/O and Standard I/O modules prevent contact
Which…
URL:
/en-de/go/akb/200603123/1
Default setting value for C1122 is too low
Which products are affected?
ECS axis module B-SW V6.7
EVS93xxEI (Servo PLC V6.5)
EVS93xxET…
URL:
/en-de/go/akb/200603128/1
No controller inhibit in case of a control reset
Which products are affected?
ECS axis module ECSxx series, operating software V6.7…
URL:
/en-de/go/akb/200603125/1
Torque limit in case of quick stop (QSP)
Which products are affected?
ECS axis module ECSxx series, operating software V6.7
EVS93xxEI…
URL:
/en-de/go/akb/200603124/1
CAN telegrams are no longer received
Which products are affected?
ECS axis module ECSxx series, operating software V6.7
EVS93xxEI (Servo…
URL:
/en-de/go/akb/200603054/1
Internal digital ¨fd=0¨ is permanently set
Which products are affected?
starttec motor starter, software version 2.0
What happens?
The…
URL:
/en-de/go/akb/200603053/1
Er255/OC9 TRIP caused by disconnecting a contactor on the mains side
Which products are affected?
starttec motor starter, software…
URL:
/en-de/go/akb/200602795/1
Wrong set velocity g_nSetVelocity_v in case of quick stop
Which products are affected?
Template Positioner as of V3.4
What happens?…