Short-circuit at motor terminals: Permanent pulse…
URL: /en-de/go/akb/201900023/1Short-circuit at motor terminals: Permanent pulse inhibit without error message (corrected from V01.03.07) Corrected from:i950 servo…
Search
Short-circuit at motor terminals: Permanent pulse inhibit without error message (corrected from V01.03.07) Corrected from:i950 servo…
EtherCAT does not start after updating the boot project…
URL: /en-de/go/akb/201900030/1EtherCAT does not start after updating the boot project and restarting the controller (fixed from V3.18) Corrected from:Controller…
Compilation error after variable declaration via input…
URL: /en-de/go/akb/201800299/1Compilation error after variable declaration via input assistance (corrected from V3.22) Corrected from:PLC Designer V3.22Response of…
Pole position identification 'PPI at standstill' does…
URL: /en-de/go/akb/201900003/1Pole position identification 'PPI at standstill' does not detect motor phase failure (corrected from V01.03.07) Corrected…
3231C (Baytrail) with connected monitor panel / p500…
URL: /en-de/go/akb/201900029/13231C (Baytrail) with connected monitor panel / p500 (Baytrail): Sporadically, the controller / panel does not start Fixed from:week…
L_MC1P - MC_MoveContinuousAbsolute:…
URL: /en-de/go/akb/201800258/1L_MC1P - MC_MoveContinuousAbsolute: 'ArithmeticError_MoveContAb', when final speed cannot be reached with profile parameters (corrected…
0x2825 manual control mode is not reset after…
URL: /en-de/go/akb/201800280/10x2825 manual control mode is not reset after interruption of communication (corrected from V01.03.07) Corrected from:Servo inverter…
Status 0x500A:5 following error warning and error is…
URL: /en-de/go/akb/201900008/1Status 0x500A:5 following error warning and error is not plausible (corrected from V01.03.07) Corrected from:Servo inverter i950…
LS_Brake - stopping torque is also used for feedforward…
URL: /en-de/go/akb/201800288/1LS_Brake - stopping torque is also used for feedforward control in the case of Fail QSP Corrected from:9400 HighLine V15.00.099400…
Actual position resolution 0x608F:1: Chanmge is not…
URL: /en-de/go/akb/201800336/1Actual position resolution 0x608F:1: Chanmge is not accepted (corrected from V01.02.03) Corrected from:Servo-Inverter i950…
L_TT1P_ElectricalShaftPos, L_TT1P_RegisterControl:…
URL: /en-de/go/akb/201900009/1L_TT1P_ElectricalShaftPos, L_TT1P_RegisterControl: Speed step changes when clutching in/declutching (corrected from V3.18.1) Corrected…
Motor moment of inertia is effective during torque…
URL: /en-de/go/akb/201800278/1Motor moment of inertia is effective during torque feedforward control although set to zero (corrected from V01.04.01) Corrected…
Unexpectedly high speed in C50:1 and C51:1 after…
URL: /en-de/go/akb/201800284/1Unexpectedly high speed in C50:1 and C51:1 after replacing device Corrected from: 9400 HighLine V15.00.09 9400 Servo PLC…
L_TT1P_CrossCutter: Mark window in "TP_From_Slave" mode…
URL: /en-de/go/akb/201800231/1L_TT1P_CrossCutter: Mark window in "TP_From_Slave" mode cannot be used (corrected from V3.18.0) Corrected from:Library:…
L_TT1P_FlexCAM: Actual position shift at the zero…
URL: /en-de/go/akb/201800250/1L_TT1P_FlexCAM: Actual position shift at the zero crossing of the cam in negative direction (corrected from V3.18.0) Corrected…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial