URL:
/en-de/go/akb/201014980/1
Error response is triggered again when the hardware limit switches are reached (eliminated from V5.0 onwards)
Eliminated from:…
URL:
/en-de/go/akb/201014979/1
Incorrect setpoint control while approaching the hardware limit switches (eliminated from V5.0 onwards)
Eliminated from:
HighLine…
URL:
/en-de/go/akb/201014978/1
Transfer of consistent parameters in the process (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware version…
URL:
/en-de/go/akb/201014976/1
Selection of the Homing operating mode and start of homing at the same time (eliminated from V5.0 onwards)
Eliminated from:
HighLine…
URL:
/en-de/go/akb/201014975/1
Response to software limit positions in the SpeedFollower operating mode (eliminated from V5.0 onwards)
Eliminated from:
HighLine…
URL:
/en-de/go/akb/201014973/1
Evaluation of the software limit positions in the SpeedFollower operating mode (eliminated from V5.0 onwards)
Eliminated from:…
URL:
/en-de/go/akb/201014972/1
Positioning: Software limit positions not always active (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware…
URL:
/en-de/go/akb/201014971/1
Homing: Selection of a final speed in the sequence profile (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware…
URL:
/en-de/go/akb/201014970/1
Homing: Reference is set at unexpected limit switch (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware version…
URL:
/en-de/go/akb/201014968/1
Step change in following error if the homing signal is detected in the Homing mode to torque limit (eliminated from V5.0…
URL:
/en-de/go/akb/201014966/1
ManualJog dependent on bReleaseLimitSwitch (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware version V05.01 or…
URL:
/en-de/go/akb/201014965/1
Homing RefMode 12/13 (Homing to limit switch) does not trigger error if limit switch is activated (eliminated from V5.0…
URL:
/en-de/go/akb/201014963/1
bPosDone is set to FALSE if bPosStop and S profile are used (eliminated from V5.0 onwards)
Eliminated from:
HighLine with firmware…