URL:
/en-de/go/akb/200607068/1
CAN system bus, response to a Network Management Telegram (NMT) is not suppressed in case of the CAN slave (elimination)
Which products…
URL:
/en-de/go/akb/200607066/1
Inverted position polarity (C1206) and deactivation of QSP or CINH (elimination)
Which products are affected?
9300EP position controller…
URL:
/en-de/go/akb/200607063/1
Current transformer offset adjustment when changing over to the acceleration mode (9321-9324) (remedied from V7.0)
Which products are…
URL:
/en-de/go/akb/200607062/1
MCTRL-UTILIZATION output, counter overflow (remedied from V7.0 in 9300ES, EP and from V8.1 in 9300EK)
Which products are affected?
9300EP…
URL:
/en-de/go/akb/200607061/1
The 9300ES holding brake (BRK) function and switching of the brake output in case of low voltage (LU) or overvoltage (OU) differs from the…
URL:
/en-de/go/akb/200607053/1
QSP behaviour when the torque limit Mmax is reached while the QSP ramp is executed (remedied from V7.0)
Which products are affected?…
URL:
/en-de/go/akb/200607051/1
Rounding deviations when code C0222 (Vp process controller PCTRL) is read out via fieldbus (remedied from V7.0)
Which products are…
URL:
/en-de/go/akb/200607050/1
Temperature drift in the current transformer requires another offset adjustment (remedied from V7.0)
Which products are affected?
9300EP…
URL:
/en-de/go/akb/200607049/1
Master (digital) frequency ramp function generator DFRFG does not work correctly in case of a negative master frequency signal (remedied…
URL:
/en-de/go/akb/200607048/1
CE4 warning (BUS-OFF state) is not reset after CAN reset node (remedied from V7.0)
Which products are affected?
9300EP position…
URL:
/en-de/go/akb/200607047/1
POS-ABS-VAL signal after homing or when the home position has been set (elimination)
Which products are affected?
9300EP position…
URL:
/en-de/go/akb/200607045/1
The MONIT-OU signal (overvoltage) is erroneously set for a short period of time when the device is switched on (remedied from V7.0)
Which…
URL:
/en-de/go/akb/200607043/1
CAN telegram counter for CAN-OUT3 (C0360/5) does not work in case of event-controlled transmission (remedied from V7.0)
Which products are…
URL:
/en-de/go/akb/200607042/1
The drive may continue to rotate in case of QSP and the encoder connected to terminal X8 may be disturbed (elimination)
Which products are…
URL:
/en-de/go/akb/200607041/1
Adjustment of the rotor displacement angle C0058 when the motor encoder is changed (remedied from V7.0 in 9300ES, EP and from V8.1 in 9300…