URL:
/en-de/go/akb/200910654/1
SYNC_bSyncInsideWindow is not set correctly (remedied from V7.0)
Eliminated from:
9400 HighLine SW V7.0
Behaviour of the new…
URL:
/en-de/go/akb/200910521/1
Positioning operations with a final speed and linear ramps (remedied from V7.0)
Eliminated from:
9400 HighLine SW V7.0
Behaviour of…
URL:
/en-de/go/akb/200905107/1
Status word Stat1.Bit13 (ActualPositionOK) is not reset when homing is started (corrected from V2.0)
Corrected from:
ECS Motion V2.0…
URL:
/en-de/go/akb/200905123/1
Status word Stat1.Bit13 (ActualPositionOK) always reset in the case of motor without thermal sensor (corrected from V2.0)
Corrected…
URL:
/en-de/go/akb/200905128/1
If an absolute value encoder is used, or in the case of C3002=1 the ¨Following error¨ fault message occurs during mains connection…
URL:
/en-de/go/akb/200905105/1
Homing cannot be started at C4000 = 1 (corrected from V2.0)
Corrected from:
ECS Motion V2.0
Behaviour of the new version?
Homing…
URL:
/en-de/go/akb/200908120/1
CAN node guarding monitoring: Premature tripping possible once after activation (eliminated from V5.0)
Eliminated from:
ECS power…
URL:
/en-de/go/akb/200908111/1
Trip reset with C0043=0 via keypad is not possible (eliminated from V5.0)
Eliminated from:
ECS power supply module ECSxE, operating…
URL:
/en-de/go/akb/200910962/1
Incorrect evaluation of a range being exceeded in the L_EsEncoderConv function block (elimination)
Eliminated from:
Library…
URL:
/en-de/go/akb/200910961/1
The L_CamSyncIn function block does not synchronise with the master speed (elimination)
Eliminated from:
LenzeCam library…
URL:
/en-de/go/akb/200910894/1
Incorrect status signals at the L_EsClutchPos function block (elimination)
Eliminated from:
Library LenzeElectricalShaft V01.03.04.00…