URL:
/en-de/go/akb/200602389/1
Representation of the absolute position in combination with absolute value encoders (FB L_CamControl) after mains connection (FB…
URL:
/en-de/go/akb/200602388/1
The g_bHomingDone status signal is not reset (elimination)
Which products are affected?
ESP-SPAC-CAM1 – Software Package Cam V2.0 (cam…
URL:
/en-de/go/akb/200602386/1
Initialisation of the UserProgram2.SFCInit SFC variable (elimination)
Which products are affected?
ESP-SPAC-CAM1 – Software Package Cam…
URL:
/en-de/go/akb/200502755/1
Parameter set changeover, setpoints are not accepted when the flying restart circuit is activated (elimination)
Which products are…
URL:
/en-de/go/akb/200603179/1
Default setting value for C1122 is too low (remedied from B-SW V7.0)
Remedied from:
ECS axis module B-SW V7.0
Behaviour of new…
URL:
/en-de/go/akb/200603176/1
Default setting under code C1121 does not correspond to the product documentation (remedied from B-SW V7.0)
Remedied from:
ECS axis…
URL:
/en-de/go/akb/200603193/1
PEr error after TRIP reset (remedied from B-SW V7.0)
Remedied from:
ECS axis module B-SW V7.0
Behaviour of new version?
Due to…
URL:
/en-de/go/akb/200603185/1
No controller inhibit in case of a control reset (remedied from B-SW V7.0)
Remedied from:
ECS axis module B-SW V7.0
Behaviour of…
URL:
/en-de/go/akb/200603192/1
L_FWM function module (remedied from B-SW V7.0)
Remedied from:
ECS axis module B-SW V7.0
Behaviour of new version?
In combination…
URL:
/en-de/go/akb/200603194/1
Error messages of the Fail-QSP type are stored in the fault memory with a wrong offset (remedied from B-SW V7.0)
Remedied from:
ECS…
URL:
/en-de/go/akb/200603195/1
Errors of the Fail-QSP type - the error message is repeatedly stored in the fault memory (remedied from B-SW V7.0)
Remedied from:…
URL:
/en-de/go/akb/200603181/1
Torque limit in case of quick stop (QSP) (remedied from B-SW V7.0))
Remedied from:
ECS axis module B-SW V7.0
Behaviour of new…
URL:
/en-de/go/akb/200603180/1
CAN telegrams are no longer received (remedied from B-SW V7.0)
Remedied from:
ECS axis module B-SW V7.0
Behaviour of new version?…