URL:
/en-de/go/akb/200901336/1
ECSxP V1.3, pdb file from GDC V4.11 contains extra codes
What happens?
While reading and writing the parameters (codes), Global Drive…
URL:
/en-de/go/akb/200902216/1
At the end of the download the card module displays the error message E4
Which products are affected?
EMZ2221IB (card module HW: 2x)…
URL:
/en-de/go/akb/200902784/1
Contacting problem at the diagnostic interface (X6)
Which products are affected?
Diagnostic adapter (E94AZCUS)
Hardware problem…
URL:
/en-de/go/akb/200809205/1
Although no homing was performed, position limit FAIL QSP occurs (P04, P05) if the drive is moved when the controller is inhibited or…
URL:
/en-de/go/akb/200809177/1
Continuous manual jog with S-shaped ramps, FAIL QSP (P14) following error
Which products are affected?
9300EP position controllers as of…
URL:
/en-de/go/akb/200808268/1
Manual jog including breakpoint for S-shaped ramps and C1259/1=0 - travelling is continued without a new edge
Which products are affected?…
URL:
/en-de/go/akb/200807856/1
Manual jog with intermediate stop in connection with new travel profile parameters while positioning is running (POS-PARAM-RD)
Which…
URL:
/en-de/go/akb/200809006/1
All subcodes of a code show the same designation on the keypad
Which products are affected?
MCI Profibus communication module equipped…
URL:
/en-de/go/akb/200809005/1
It is not possible to set a response for the communication monitoring between the second master and the communication module
Which…
URL:
/en-de/go/akb/200809004/1
The Profibus address is sporadically not accepted when being set via code
Which products are affected?
MCI Profibus communication module…
URL:
/en-de/go/akb/200809000/1
Function restriction during parameter set upload via Profibus
Which products are affected?
MCI Profibus communication module equipped…
URL:
/en-de/go/akb/200808183/1
Unexpected long deceleration in case of large S-ramp times
Which products are affected?
L_MCProfileGenerator profile generator of the…
URL:
/en-de/go/akb/200808182/1
Speed setpoint step-change in case of deceleration with S-ramps
Which products are affected?
L_MCProfileGenerator profile generator of…
URL:
/en-de/go/akb/200808181/1
Restart of the touch probe profile when the positioning is aborted
Which products are affected?
L_MCProfileGenerator profile generator of…
URL:
/en-de/go/akb/200808171/1
Wrong deceleration ramp when the speed is reduced
Which products are affected?
L_MCProfileGenerator profile generator of the…