URL:
/en-de/go/akb/200504973/1
Current oscillations in case of vector control with feedback
Which products are affected?
9300 vector 55…90 kW SW ≤ V6.3
What happens?…
URL:
/en-de/go/akb/200504971/1
INT1 and INT2 integrators: Indication of texts
Which products are affected?
9300 vector 0.37…90 kW SW ≤ V6.3
What happens?
In the INTx…
URL:
/en-de/go/akb/200504962/1
Communication interruption between keypad and drive controller
Which products are affected?
9300 vector 0.37…90 kW SW ≤ V6.3
in…
URL:
/en-de/go/akb/200504958/1
Overvoltage OU: switch-off threshold is too low
Which products are affected?
9300 vector 0.37…90 kW SW ≤ V6.3
What happens?
The drive…
URL:
/en-de/go/akb/200504947/1
Flying restart circuit, MCTRL-NACT (C0051) deviates from current motor speed
Which products are affected?
9300 vector 0.37…90 kW SW ≤…
URL:
/en-de/go/akb/200504944/1
Behaviour of MCTRL-M-ADD and MCTRL-N/M-SWT in case of U/f characteristic control
Which products are affected?
9300 vector 0.37…90 kW SW…
URL:
/en-de/go/akb/200504943/1
QSP is not displayed when controlling the drive via CAN-IN1
Which products are affected?
9300 vector 0.37…90 kW SW ≤ V6.3
What happens?…
URL:
/en-de/go/akb/200501312/1
No identification of the Lenze profibus participant when a drive fails
Which products are affected?
DriveServer in conjunction with bus…
URL:
/en-de/go/akb/200504804/1
Function restrictions concerning the starttec operating structure
Which products are affected?
Keypad XT (version 3A21) in combination…
URL:
/en-de/go/akb/200504798/1
Overvoltage and low voltage is insufficiently indicated by the Fail message
Which products are affected?
Keypad XT (version 3A21) in…
URL:
/en-de/go/akb/200504799/1
Faulty password processing in combination with the 9300 series
Which products are affected?
Keypad XT (version 3A21) in combination with…
URL:
/en-de/go/akb/200501621/1
Evaluation of the last scan value at the function block L_CamSetXAxisVelocity
Which products are affected?
ESP-SPAC-CAM1 – Software…
URL:
/en-de/go/akb/200501617/1
Cam, stretching and compression of the y-axis
Which products are affected?
9300 servo cam
What happens?
There are drifts at the drive,…
URL:
/en-de/go/akb/200501605/1
Exceeded value range at position output of the function block L_CamExtrapolate
Which products are affected? ESP-SPAC-CAM1 – Software…