GDC menu for CAN3-IN - corresponding display codes are…
URL: /en-de/go/akb/201107773/1GDC menu for CAN3-IN - corresponding display codes are not available (remedied from DDS V2.4 and GDC V4.13) Eliminated from: Global…
Search
GDC menu for CAN3-IN - corresponding display codes are not available (remedied from DDS V2.4 and GDC V4.13) Eliminated from: Global…
PR5 trip after saving the parameter set (eliminated…
URL: /en-de/go/akb/201107771/1PR5 trip after saving the parameter set (eliminated from DPLC V8.3 onwards) Eliminated from: EPL-10200 (Drive PLC) from V8.3 onwards…
Synchronisation with sync telegram and digital input I1…
URL: /en-de/go/akb/201107747/1Synchronisation with sync telegram and digital input I1 not possible (eliminated from DPLC V8.3 onwards) Eliminated from: EPL-10200…
CumLossOfLink is incremented despite connection…
URL: /en-de/go/akb/201107738/1CumLossOfLink is incremented despite connection (eliminated from V1.10) Eliminated from: Communication module E94AYCEP Firmware V1.10…
Incrementing function of the LossOfSoC counter cannot…
URL: /en-de/go/akb/201107736/1Incrementing function of the LossOfSoC counter cannot be ensured in case of optional nodes (eliminated from V1.10 onwards) Eliminated…
No communication when being connected to a B&R…
URL: /en-de/go/akb/201107734/1No communication when being connected to a B&R Powerlink master (eliminated from V1.10) Eliminated from: E94AYCEP Communication…
Modules cannot be used with large bus cycle times…
URL: /en-de/go/akb/201107741/1Modules cannot be used with large bus cycle times (eliminated from V1.12) Eliminated from: Communication module E94AYCEP Firmware…
The 9400 indicates the error message ¨control card…
URL: /en-de/go/akb/201107740/1The 9400 indicates the error message ¨control card defect¨ (eliminated from V1.12) Eliminated from: Communication module E94AYCEP…
No communication when being connected to a B&R…
URL: /en-de/go/akb/201107739/1No communication when being connected to a B&R Powerlink master when a dynamic PDO mapping is used in the xdd device description file…
Error correction of the default setting 'PDO length'…
URL: /en-de/go/akb/201107572/1Error correction of the default setting 'PDO length' after loading the default setting (eliminated from V0.2 onwards) Eliminated from:…
Event-controlled transmission of Tx PDOs with cyclic…
URL: /en-de/go/akb/201107578/1Event-controlled transmission of Tx PDOs with cyclic superimposition (eliminated from V2.0 onwards) Eliminated from: CANopen bus…
Faultless support of the ¨Reset Communication¨ CANopen…
URL: /en-de/go/akb/201107581/1Faultless support of the ¨Reset Communication¨ CANopen command (eliminated from V2.0 onwards) Eliminated from: CANopen bus coupler…
EtherCAT telegram failure detection with Lenze…
URL: /en-de/go/akb/201108208/1EtherCAT telegram failure detection with Lenze controllers (eliminated from V1.3 onwards) Eliminated from: EMF 2192 communication…
Possible CoE parameter communication with codes lower…
URL: /en-de/go/akb/201107388/1Possible CoE parameter communication with codes lower than 4 bytes (eliminated from V1.3 onwards) Eliminated from: EMF 2192…
EtherCAT communication status is not transmitted…
URL: /en-de/go/akb/201107385/1EtherCAT communication status is not transmitted correctly to the basic device (eliminated from V1.3 onwards) Eliminated from: EMF…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial