URL:
/en-de/go/akb/200406984/1
Communication cannot be established via EMF2173 (LPT1-Dongle)
Question: Why can a CAN communication not be established via the…
URL:
/en-de/go/akb/200406724/1
Blocked motor, reduction of the residual hazards
Question:
How can the residual hazard of an overheated motor be reduced when the…
URL:
/en-de/go/akb/200404652/1
Password protection, restricted access to codes
Question:
Can the access to codes of 8200 vector/motec and 9300 be restricted by…
URL:
/en-de/go/akb/200406298/1
Time limit of the overload capacity
Question:
How much and how long can a frequency inverter be overloaded?
Answer:
A Lenze…
URL:
/en-de/go/akb/200406172/1
Unassigned signal inputs at function blocks (FIXED-FREE)
Question:
How does the function 'FIXED-FREE' in the function block editor…
URL:
/en-de/go/akb/200403469/1
Dead time compensation of bus operating times via FB L_CamContactorVPOS
Question: When master values are transmitted via the system…
URL:
/en-de/go/akb/200405585/1
Define fonts - part of the HMI project
Question:
Are the define fonts used in the HMI project part of the project?
Answer:…
URL:
/en-de/go/akb/200405798/1
GDC data transfer via OPC Drive Server for S7
Question:
Is it possible to transfer a complete GDC parameter set file in connection…
URL:
/en-de/go/akb/200405076/1
Maximum number of equations
Question:
What is the maximum number of equations?
Answer:
The maximum number of equations is 32.…
URL:
/en-de/go/akb/200405071/1
Missing selection possibility of the COM1 interface in GDC with LECOM A/B
Question:
Why can in GDC the COM1 interface not be…
URL:
/en-de/go/akb/200405082/1
Restricted definition of macros
Question:
In what way are there restrictions of definitions of macros in the HMI Designer?…
URL:
/en-de/go/akb/20038180/1
Extension of the 87 Hz - technology for 150 Hz
Question:
Is it possible to operate a motor with a special winding (135V delta / 230…
URL:
/en-de/go/akb/20033477/1
Remote maintenance of Drive and Servo PLC with DDS
Description: The attached document describes how a program download or diagnostics…
URL:
/en-de/go/akb/20039278/1
Relative positioning, behaviour after interruption caused by controller inhibit or failure
Question: How does the 9300EP positioning…
URL:
/en-de/go/akb/200403370/1
PR1-TRIP of ServoPLC / Drive PLC - possible causes
Question:
How can a PR1-Trip of the Servo PLC / Drive PLC be caused?…