SSI encoder position integrating with v_max
URL: /en-de/go/akb/201301279/1SSI encoder position integrating with v_max Fixed from: Inverter Drive 8400 TopLine from V14.00.00.00.Behavior of the new…
Search
SSI encoder position integrating with v_max Fixed from: Inverter Drive 8400 TopLine from V14.00.00.00.Behavior of the new…
Position at LS_MultiEncoder does not directly follow…
URL: /en-de/go/akb/201301195/1Position at LS_MultiEncoder does not directly follow the encoder position Corrected from: Inverter Drives 8400 TopLine…
Position control during QSP uses actual value of…
URL: /en-de/go/akb/201301194/1Position control during QSP uses actual value of position encoder Corrected from: Inverter Drives 8400 TopLine…
Speed-dependent zero pulse offset
URL: /en-de/go/akb/201301192/1Speed-dependent zero pulse offset Corrected from:Inverter Drives 8400 TopLine V15.01.00 Response of the new version:There is…
Unexpected zero pulse at DFOUT with RS as signal source
URL: /en-de/go/akb/201301176/1Unexpected zero pulse at DFOUT with RS as signal source Corrected from:Firmware version 21.00.00.00 fixes this behavior.Response of…
Ethernet Powerlink synchronisation not possible
URL: /en-de/go/akb/201301118/1Ethernet Powerlink synchronisation not possible Corrected from:Inverter Drives 8400 StateLine V13.00.00Inverter Drives 8400…
EtherCat sync cannot be used - incorrect bus status
URL: /en-de/go/akb/201301117/1EtherCat sync cannot be used - incorrect bus status Corrected from:EtherCat communication module E84AYCET version…
Following error is deleted at controller inhibit
URL: /en-de/go/akb/201301116/1Following error is deleted at controller inhibit Corrected from: Inverter Drives 8400 HighLine V14.00.00Inverter Drives…
MCK setpoints not increment-precise in the case of QSP
URL: /en-de/go/akb/201301114/1MCK setpoints not increment-precise in the case of QSP Corrected from: Inverter Drives 8400 StateLine…
Quantisation of the M-feedforward control with a…
URL: /en-de/go/akb/201301100/1Quantisation of the M-feedforward control with a correlation of J and t_acc Corrected from:Inverter Drives 8400 StateLine…
M-feedforward control unstable if the sensitivity of…
URL: /en-de/go/akb/201301099/1M-feedforward control unstable if the sensitivity of setpoint feedforward control is ≤12 bits Corrected…
Torque limitation takes effect in the case of QSP
URL: /en-de/go/akb/201301097/1Torque limitation takes effect in the case of QSP Eliminated from: 8400 StateLine, HighLine and TopLine: FW version >=…
Brake chopper threshold is not adapted depending on…
URL: /en-de/go/akb/201301085/1Brake chopper threshold is not adapted depending on C173 Eliminated from: 8400 StateLine, HighLine and TopLine: FW version >=…
Motor shaft rotates in spite of speed setpoint=0 or QSP…
URL: /en-de/go/akb/201300832/1Motor shaft rotates in spite of speed setpoint=0 or QSP (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400 TopLine from…
KTY sensor error in the case of a very low resistance…
URL: /en-de/go/akb/201300831/1KTY sensor error in the case of a very low resistance value (Eliminated from FW 12.00) Eliminated from: Inverter Drives 8400 TopLine…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial