URL:
/en-de/go/akb/202200239/1
Unexpected error when confirming the safe parameter set (corrected from V1.22.1)
Corrected from:EASY Starter V1.22.1Response of the…
URL:
/en-de/go/akb/202200242/1
Test movement in manual mode: The correct polling required for synchronous motors is not monitored (corrected from V01.08.00)
Corrected…
URL:
/en-de/go/akb/202200214/1
i950 ES: SDI monitoring no longer works after using the 'Muting' function with a pending SDI error
Corrected from:i950 Extended Safety…
URL:
/en-de/go/akb/202200252/1
Oscilloscope recording cannot be uploaded from i550 (corrected from V3.26)
Corrected from:PLC Designer V3.26Response of the new…
URL:
/en-de/go/akb/202200192/1
Safety modules: Data type of the instantiated function module has changed (corrected from controller device description V01.08 /…
URL:
/en-de/go/akb/202200183/1
After a device exchange of an EtherCAT slave, the EtherCAT is not operational. (corrected from V3.21.3 / V1.9)
Corrected from:Cabinet…
URL:
/en-de/go/akb/202200227/1
L_MC2P - MC_GearIn: Status not correctly displayed during acceleration phase of the master (corrected from V03.26.00)
Corrected…
URL:
/en-de/go/akb/202200199/1
L_MC1P Limiter: Setpoint jumps and offset between master and slave with activated SLS follower reaction (corrected from…
URL:
/en-de/go/akb/202200169/1
L_MC1P: Falsely occurring error message 0x50CF (error external encoder), although position control via motor encoder is active (corrected…
URL:
/en-de/go/akb/202200127/1
i950 TA Cia402-Advanced: When switching to subindex :085 = 'permanently set' a wrong actual position is displayed, due to a wrongly not…
URL:
/en-de/go/akb/202200099/1
L_MC1P: MC_ReadParameter sporadically returns wrong read result despite status xValid=True, with parallel execution in different tasks …