Incorrect setpoint control while approaching the…
URL: /es-es/go/akb/201014979/1Incorrect setpoint control while approaching the hardware limit switches (eliminated from V5.0 onwards) Eliminated from: HighLine…
Search
Incorrect setpoint control while approaching the hardware limit switches (eliminated from V5.0 onwards) Eliminated from: HighLine…
Transfer of consistent parameters in the process…
URL: /es-es/go/akb/201014978/1Transfer of consistent parameters in the process (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware version…
Selection of the Homing operating mode and start of…
URL: /es-es/go/akb/201014976/1Selection of the Homing operating mode and start of homing at the same time (eliminated from V5.0 onwards) Eliminated from: HighLine…
Response to software limit positions in the…
URL: /es-es/go/akb/201014975/1Response to software limit positions in the SpeedFollower operating mode (eliminated from V5.0 onwards) Eliminated from: HighLine…
Positioning operating mode: Interruption of absolute…
URL: /es-es/go/akb/201014974/1Positioning operating mode: Interruption of absolute positioning with QSP / RSP / DCB (eliminated from V5.0 onwards) Eliminated from:…
Evaluation of the software limit positions in the…
URL: /es-es/go/akb/201014973/1Evaluation of the software limit positions in the SpeedFollower operating mode (eliminated from V5.0 onwards) Eliminated from:…
Positioning: Software limit positions not always active…
URL: /es-es/go/akb/201014972/1Positioning: Software limit positions not always active (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware…
Homing: Selection of a final speed in the sequence…
URL: /es-es/go/akb/201014971/1Homing: Selection of a final speed in the sequence profile (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware…
Homing: Reference is set at unexpected limit switch…
URL: /es-es/go/akb/201014970/1Homing: Reference is set at unexpected limit switch (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware version…
Homing mode 12 / 13 (Homing to hardware limit switch)…
URL: /es-es/go/akb/201014969/1Homing mode 12 / 13 (Homing to hardware limit switch) reference detection (eliminated from V5.0 onwards) Eliminated from: HighLine…
Step change in following error if the homing signal is…
URL: /es-es/go/akb/201014968/1Step change in following error if the homing signal is detected in the Homing mode to torque limit (eliminated from V5.0…
ManualJog dependent on bReleaseLimitSwitch (eliminated…
URL: /es-es/go/akb/201014966/1ManualJog dependent on bReleaseLimitSwitch (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware version V05.01 or…
Homing RefMode 12/13 (Homing to limit switch) does not…
URL: /es-es/go/akb/201014965/1Homing RefMode 12/13 (Homing to limit switch) does not trigger error if limit switch is activated (eliminated from V5.0…
bPosDone is set to FALSE if bPosStop and S profile are…
URL: /es-es/go/akb/201014963/1bPosDone is set to FALSE if bPosStop and S profile are used (eliminated from V5.0 onwards) Eliminated from: HighLine with firmware…
If speed setpoint = 0, the motor does not start when…
URL: /es-es/go/akb/201014954/1If speed setpoint = 0, the motor does not start when the nMin / nMax speed limits are used (eliminated from V5.0 onwards) Eliminated…
Notice:
- The product and company related documentation (PDFs) as well as Application Knowledge Base articles can be found in the Knowledge Base
- Please use the EASY Product Finder to search for product keys and detailed technical information
- For more information on the search function check out the tutorial